Airdrie

Airdrie boiler repairs

Please select a manufacturer Manufacturers could not be loaded. Please select the appliance again to retry.
No obligation padlock100% secure
Clock
Save Time
Thumbs Up
Reliable Service
Payment Cards
Save Money
  • Fixed price repairs†
  • Same day & next day repairs available
  • Gas Safe Registered engineers
  • Manufacturer approved

† Find out whether our amazing fixed price repair and no fix no fee offers are available for your manufacturer by getting a quote today.

Boiler repairs in Airdrie by Gas Safe engineers

Go Assist offers boiler repairs in Airdrie at a fixed price. Wherever possible, we aim to fix your boiler the same day or next day, and the work comes with our repair guarantee. Whether the heating won't come on or the hot water runs cold, we can help.

We fix all types of boiler, including combi, gas and electric models. You pick a date that suits you when you book, and we send an engineer. Your engineer starts by finding the cause of the fault. If a part has failed, they fit a new one. They can also give you advice on keeping the boiler in good order.

Pressure drops and leaks in Airdrie

Most boilers run at a pressure between 1 and 1.5 bar. If the gauge drops below 1 bar, the boiler may stop working. You can usually top it up using the filling loop, as your manual explains.

If the pressure keeps falling, water is escaping somewhere. It could be a radiator valve, a joint in the pipework or a part inside the boiler. A boiler engineer in Airdrie can find the root of the problem and fix it.

Look for drips under the boiler, damp patches or rust marks on pipes. A leak doesn't always show, so a boiler that needs topping up every few days usually has one. Small leaks are easier to fix when they are found early.

Bleeding a radiator also lowers the pressure. Check the gauge after you bleed each one. If it has dropped, top the system back up.

Pressure that is too high can cause problems too. If the needle sits in the red zone, turn the boiler off and get it checked. The pressure relief valve may also let water out through a small pipe outside.

After a top-up, keep an eye on the gauge for a few days. If it stays steady, the cause may have been air in the radiators. If it falls again, there is likely to be a leak.

Keep your boiler manual somewhere easy to find. It lists the right pressure, the reset steps and what each code means.

Book your boiler repair online or call 0333 733 5127 today.

Call us now

0333 733 1234

Frozen condensate pipes and other problems we fix

We are often asked to fix faults such as:

  • Frozen condensate pipe and a fault code on the display
  • No heating at the times set on the timer
  • Boiler keeps losing pressure, so you top it up often
  • Boiler leaking from the pressure relief pipe
  • Error code on the display and no heating
  • No hot water when the heating is working
  • Boiler not igniting, or the pilot light won't stay lit
  • Banging, gurgling or whistling noises when hot water runs

Book online in a couple of minutes, or call us on 0333 733 5127.

Which boiler brands we fix

We work on every leading brand of boiler, for example:

Towns we cover around Airdrie

We also fix boilers in the towns around Airdrie:

Boiler help & advice

Our guides explain common boiler problems in more detail:

We're rated Great on Trustpilot - Here's our latest reviews

Airdrie Boiler Repairs FAQs

Have a question about boiler repairs in Airdrie? You may find the answer below. If your question isn't here, try our boiler FAQ page.

What do I do if my condensate pipe freezes?

Thaw it gently with warm water, then restart the boiler. Find the plastic pipe that runs from the boiler to the drain outside. The frozen part is usually at the end or at a bend. Once the ice has cleared, reset the boiler using the button or the steps in your manual.

What does a fault code on my boiler mean?

Each code stands for a different fault. The meaning varies by make, so check the list in your manual or our error codes guide. Some codes just need the pressure topped up. If the code won't clear, or keeps coming back, a Gas Safe engineer should look at it.

Is it cheaper to repair or replace my boiler?

Repair it first, in most cases. A repair costs less than a new boiler and gets your heating back sooner. Boilers usually last 10 to 15 years with regular servicing. If yours is near the end of that and keeps failing, our engineer can explain whether replacing it would save money.

Can you come out the same day?

Often, yes, or the next day. We aim to reach you that quickly wherever possible. It depends on how busy our engineers are in your area at the time. You'll see the available dates when you book online, and you can choose the one that works for you.

I can smell gas at home, what do I do?

Phone National Gas Emergency on 0800 111 999 straight away. Open doors and windows, and turn off the gas at the meter if you can. Don't use light switches, plugs or anything that could cause a spark. Leave the property and wait outside for the emergency engineer to make it safe.